Heath Zenith - 598-1281-02

Below are all the different types of Heath Zenith. Select the device of your choice, to download the manual

Contents

HeathZemth LED Lighted Push Button with Keyfinder Light The push button is set from the factory for use with mechanical chimes but can be used with either mechanical or electronic chimes Follow these instructions to install your push button and set it to work with your particular chime IMPORTANT Push button must be installed with keyfinder light facing downward 2007 HeathCo LLC 598 1281 02 Installation IMPORTANT DO NOT install addi tional diode s to push button Additional diode s will cause chime to malfunction 1 Using a small screwdriver push in tab on bottom of push button to remove back see Figure 1 2 Insert wires through hole in center of push button back Attach back to wall with screws provided see Fig ...